A pencil-width gap is enough. Mouse proofing is detail work: pipes, wires, vents, door corners and the line where the siding meets the foundation.
Where we look first
Dryer vents, gas and electrical lines, plumbing penetrations under sinks, garage door corners and sill plates account for many entry points. University of Missouri Extension specifically lists caulk for gaps around windows, doors, dryer vents and utility lines.
Materials that hold
Copper wool is stuffed into larger openings because mice cannot chew through it, then covered with sealant. Hardware cloth works for vents. Extension also warns that plastic, wood and cloth will not keep mice out, so those are not used as fillers.
Mice climb
They climb rough vertical surfaces and jump about 12 inches onto a flat surface, according to Extension. An upper-level gap near the roofline or a trellis against the wall can be as useful to a mouse as a gap at ground level, so we check up high too.
Sealing checklist
- Utility penetrations: gas, electric, plumbing, cable
- Dryer, range hood and bath vents
- Garage door corners and door sweeps
- Foundation line and sill plate
- Roofline, soffits and siding gaps
If this matches what you are seeing, it may also help to read about mouse control, rodent exclusion and proofing the attic.
Source for the facts about mouse proofing and sealing of entry points on this page: University of Missouri Extension, Controlling House Mice (G9442, reviewed October 2022).